Wireless Network Manager Administration Guide
- Wireless Network Manager
- Getting Started with Wireless Network Manager
- Overview
- Using Air Marshal
- Managing Your Network
- Managing Policies
- Policy Hierarchy
- Select an AP Policy
- Select a Switch Policy
- General
- System
- Spanning Tree Protocol
- Link Layer Discovery Protocol
- Voice VLAN
- Quality of Service (QoS)
- Internet Group Management Protocol (IGMP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Snooping
- Dynamic Host Configuration Protocol (DHCP) Relay
- Loopback Detection
- Jumbo Frames
- Multicast Filtering
- 802.1X
- Static Route IPV4
- DoS
- Radius Server
- Mirror Settings
- Address Resolution Protocol
- Static MAC Address Table
- SNMP
- Ports
- Link Aggregation
- VLAN
- Select an SSID
- Select a Security Policy
- AP Policies
- Using Tags to Manage Access Points and SSIDs
- QoS Policies
- Wi-Fi Multimeda (WMM) Profiles
- Managing Switch Policies
- Managing SNMP Policies
- Managing Switch SNMP Policies
- Policy Hierarchy
- Security
- Admin
- SonicWall Support
Adding Switch Policies
To add a Switch policy
- Navigate to Policies > Switch Polices.
-
Click the Add (+) icon to create a policy. The Switch Config page displays.
-
Set the options for the new policy. For detailed information, refer to Select a Switch Policy.
You only need to set the options where you want them to be different from the Default Switch Policy. If you want the change to affect all Switches, edit the Default Switch Policy instead of creating a new Switch policy.
- Click OK.
For more information on configuring and using the SonicWall Switch, refer to the Switch Administration Guide. This and other documentation are available under the product name “Switch” on theSonicWall support website at: https://www.sonicwall.com/support/technical-documentation/.
Was This Article Helpful?
Help us to improve our support portal