IPv6 Interface Configuration Constraints

• The HA interface cannot be configured for IPv6.

• Only the parent interface of a SwitchPort group can be configured as an IPv6 interface; hence, all children of a switch port group must be excluded from this list.

• Zone and Layer 2 Bridge groups are shared configurations between IPv4 and IPv6 on an interface. When they are configured on the IPv4 side, the IPv6 side of the interface uses the same configuration.

• Default Gateway and DNS Servers can only be configured for WAN zone interfaces.

• Wire mode is supported for IPv6, but you can not edit any settings. Instead, SonicOS uses the same configuration options set for IPv4.