Configuring Windows Network Name Resolution

If you want to browse files on a Windows network using WorkPlace, you must specify a WINS (Windows Internet Name Service) server and a Windows domain name. WorkPlace uses this information to perform name resolution and build a list of resources for users to browse.

To configure Windows network name resolution

1. In the AMC, navigate to System Configuration > Network Settings.

2. In the Name Resolution area, click Edit.

   The Name Resolution page displays.

3. In the Windows Networking area, enter:

   

   • The IP address of your primary and (if applicable) secondary WINS server.

     WINS does not support IPv6 addresses.

   • Your Windows domain name using NetBIOS syntax (for example, mycompany).

     If you are not using a WINS server, do not enter a value in the Windows domain name field.

4. Click Save.