Specifications and Rack Installation

After you’ve unpacked the appliance, you’re ready to install and configure it on your network. The appliances are designed to fit on a standard, 19-inch telecom rack. Before connecting the appliance, make sure that you have sufficient space and adequate power.

The SMA 7210 and SMA 6210 include:

• Rails (in kit, not attached)
• Standard IEC 60320 C13 to NEMA 15 USA only power cord(s)
• 6 1Gb Ethernet ports
• 2 10Gb SFP+ ports (on SMA 7210)
• 2 USB ports
• 1 DIAG port
• 2 500 GB SATA hard drives:

Specifications

	SMA 7210	SMA 6210
Regulatory Model/Type	1RK30-0AF	1RK31-0B0
CPU	E3-1275 3.5GHz	I5-4570S 2.9GHz
RAM	4 x 4GB or 16GB	4 x 2GB or 8GB
Network ports	8 (6-port 1GE + 2-port 10Gb SFP+)	6 (6-port 1GE)
Power supply	Dual, hot-swappable power supplies	Fixed
Front panel illustration	See SMA 6210/7210 Front Panels	See SMA 6210/7210 Front Panels