SonicOS 8 SD-WAN

Viewing SD-WAN Rules Connections

You can view the connections that have been associated with SD-WAN Rules on the MONITOR | SD-WAN > SD-WAN Connections page.

  • To view the activities associated with IPv4 SD-WAN Rules, click IPv4 tab.
  • To view the activities associated with IPv6 SD-WAN Rules, click IPv6 tab.
SD-WAN Connection Details
SRC MAC MAC address of the source host.
SRC VENDOR Name of the vendor of the source host.
SRC IP IP address of the source host.
SRC PORT Port on the source host.
DST MAC MAC address of the destination host.
DST VENDOR Name of the vendor of the destination host.
DST IP IP address of the destination host.
DST PORT Port on the destination host.
PROTOCOL Protocol used for the connection.
SRC IFACE Interface on the firewall that is the source of the connection.
DST IFACE Interface on the firewall that is the destination of the connection.
SRC ROUTE Source route of the connection.
DST ROUTE Destination route of the connection.
FLOW TYPE Type of data flow control, such as FTP Control.
IPS CATEGORY Intrusion Prevention Service (IPS) category. If this information is not available or relevant, the column displays N/A.
ABR APP ID App-Based Routing Application ID.
ABR CATEGORY ID App-Based Routing Category ID.
EXPIRY (SEC) Number of seconds until the connection expires.
TX BYTES Number of bytes transmitted on the connection.
RX BYTES Number of bytes received on the connection.
TX PKTS Number of packets transmitted on the connection.
RX PKTS Number of packets received on the connection.
Flush Displays the Flush icon. Clicking the icon flushes the connection.
Total Total number of entries on the page. This is displayed at the bottom of the page.

You can perform the following actions on the page:

  • To search the connections, enter a keyword related to an activity in the Search bar.
  • To filter the connections, click Filter icon, select the appropriate filter options, and then click APPLY FILTERS.
  • To clear the applied filters, click the Clear Filter icon.
  • To export the connections in CSV or TXT format, click the Export icon and select the required format.
  • To refresh the page, click the Refresh icon.