You can create multiple SD-WAN Groups to meet your requirements.
To add an SD-WAN group
The Add SD-WAN Group dialog box is displayed.

From the Type options, select VPN, Non-VPN, or Hybrid. For the differences, see About SD-WAN Groups.
Select the Type before you add interfaces to the SD-WAN group. After you save the group, the Type cannot be changed, and editing the group does not change it. This field is available in SonicOS 8.2.3 and later versions.
Select the checkbox for the interface you want to add to the group.
Interface priority in the group is based on the selection order. To modify the priority, click the Edit (three dots)
icon, update the priority value, and then click the Save
icon. A confirmation dialog box appears; click OK.
Once a non‑VPN interface (LAN, DMZ, WLAN, or WAN) is added to an SD‑WAN group, its zone type cannot be changed (for example, from WAN to LAN or vice versa). This restriction prevents configuration inconsistencies and maintains SD‑WAN group stability. To change the zone type, first remove the interface from the SD‑WAN group.
Enter the Cost, Ingress Bandwidth, and Egress Bandwidth values for each interface. For non-VPN interfaces, also enter the SD-WAN Gateway value.
For non-VPN interfaces other than WAN, such as LAN, DMZ, or MPLS interfaces, you must enter an SD-WAN Gateway. For VPN tunnel interfaces, SD-WAN Gateway is not required.
The Ingress Bandwidth and Egress Bandwidth values must be between 1000 kbps and 1000000 kbps.