SD-WAN Rules bring Path Selection Profiles and routing criteria together to provide dynamic path selection. An SD-WAN rule matches traffic by source, destination, and either a service, an application match object ("Application List" or "Application Category List"), or a SaaS & AI Application Group. The Path Selection Profile of the rule then chooses the outgoing path dynamically, based on the profile's parameters. If there is more than one path qualified by the Path Selection Profile, the traffic is automatically load balanced among the qualified paths. If no path is qualified by the Path Selection Profile, and the backup interface in the profile is not configured or is down, the rule is disabled and its traffic is routed by the remaining routing rules.
In SonicOS 8.2.3 and later, SD-WAN rules can match traffic by SaaS App. When you select SaaS App, the SD-WAN rule applies path selection based on the application that is determined by a first-packet destination IP address lookup. This enables immediate SD-WAN routing decisions for SaaS applications without waiting for deep packet inspection (DPI) classification or requiring Secure Sockets Layer (SSL) inspection. The SaaS & AI Application database must be downloaded (Cloud Sync) and an SD-WAN group must exist before you can use SaaS App. For more information, see the SaaS & AI Applications chapter in the SonicOS 8 Objects Administration Guide.
You can also configure or view SD-WAN rules on the POLICY | Rules and Policies > Routing Rules page. The NETWORK | SD-WAN > Rules page shows and lets you configure only SD-WAN rules.
| Column | Description |
|---|---|
| IP VERSION | The IP version is shown by an icon showing whether the rule is for IPv4 and/or IPv6. |
| NAME | Name of the SD-WAN rule. |
| SOURCE | Source address object for the SD-WAN Rule. |
| DESTINATION | Destination address object for the SD-WAN Rule. |
| SERVICE | Service object for the SD-WAN rule. If App or SaaS App was selected instead of Service for the type of rule, N/A appears. |
| APP |
Application match object for the SD-WAN rule. If Service or SaaS App was selected instead of App for the type of rule, N/A appears. "Application List" or "Application Category List" match objects used here are created at OBJECT | Match Objects > Match Objects. |
| SAAS APP |
SaaS & AI Application Group for the SD-WAN Rule. If Service or App was selected instead of SaaS App for the type of rule, N/A appears. Traffic matching is based on first-packet destination IP lookup. This field is available in SonicOS 8.2.3 and later versions. |
| TOS/MASK | Hexadecimal Type of Service (TOS) value and TOS mask. The field is blank if neither value is configured. |
| PATH PROFILE | Path Selection Profile for the SD-WAN Rule. |
| INTERFACE | SD-WAN interface group associated with the SD-WAN Rule. |
| METRIC | Metric used for the SD-WAN Rule. |
| PRIORITY | Priority of the rule in the Routing Rules table. |
| SCHEDULE |
Schedule for the SD-WAN rule. The rule is enabled or disabled according to the defined schedule. This field is available in SonicOS 8.2.1 and later versions. |
| COMMENT | When you hover over the comment icon, the comment entered when the SD-WAN Rule was configured is displayed. |
| ACTIONS | Provides options to edit or delete the SD-WAN Rule. |
To customize the SD‑WAN Rules page view, click Grid Settings at the top‑right of the page, and then select or clear the checkboxes based on your viewing preferences.