SonicOS 7.0 Access Points
Table of Contents
Viewing BLE Scanned Data
The DEVICE | Access Points > Bluetooth LE page displays information about nearby Bluetooth Low Energy (BLE) devices. You can control the display by selecting a single SonicWave or All Access Points from the Access Point drop-down menu at the top of the page.
The table that follows displays information scanned from nearby BLE devices. The columns provide the following information, if available:
| Column | Description |
|---|---|
| # | Reference number for the table row. |
| Access Point Name | Name of the access point (the SonicWave) scanning the BLE device. |
| Device Name | Name of the BLE device. |
| MAC Address | Unique hardware address of the device. |
| Vendor | Device manufacturer. |
| RSSI | Received signal strength indicator for the BLE device, expressed as a negative number (dB). Higher numbers (closer to zero) indicate stronger signals. |
| UUID |
Proximity UUID, unique identifier of the BLE device. Exactly 36 hex characters and hyphens. Must not be set to all zeros. |
| Major |
The significant identity within the group of BLE devices. Valid values are 0 - 65535. 0x0000 = unset. |
| Minor |
The secondary identity within the group of BLE devices. Valid values are 0 - 65535. 0x0000 = unset. |
| Power | Power level of the BLE device in dBm. This is the measured power of the scanned devices, which is calculated by averaging multiple RSSI samples in a process corresponding to that defined by Apple. |