• Secure Mobile Access 10.2 for the SMA 100 Series
• Introduction
  • Obtaining The Latest Secure Mobile Access Firmware
  • Exporting a Copy of your Configuration Settings
  • Upgrading the Appliance with New Firmware
  • Resetting the SMA Physical Appliance using SafeMode
  • Importing Configuration Settings
    • SMA Versions Supporting Configuration Import
    • Platform Configuration Import Support Table
  • Resetting SMA to Factory Default Settings
• SonicWall Support
  • About This Document

Introduction

This Upgrade Guide provides instructions for upgrading your SonicWall® Secure Mobile Access (SMA) 100 Series system from previous versions of Secure Mobile Access firmware to the latest version of SMA 10.2.1. This guide also provides information about importing the configuration settings from an appliance running versions of SMA 9.0.0.10-28v, or 10.2.x to an appliance running SMA 10.2.x. See Upgrading the Appliance with New Firmware and Importing Configuration Settings for details about the models and firmware versions supported.

• Knowledge Base Articles for Upgrading
• Obtaining The Latest Secure Mobile Access Firmware
• Exporting a Copy of your Configuration Settings
• Upgrading the Appliance with New Firmware
• Upgrading an SMA 400/410/500v with High Availability
• Resetting the SMA Physical Appliance using SafeMode
• Importing Configuration Settings
• Resetting SMA to Factory Default Settings
• SonicWall Support

Knowledge Base Articles for Upgrading

Be sure to review the following Knowledge Base articles before upgrading your SMA appliance.

• SMA 100 Series Support Matrix

• How To Upgrade Firmware On SMA 100 Series Appliances

• SMA100: Configuration Migration Tool

• Additional SMA 100 Series 10.X And 9.X Firmware Updates Required

• SMB SSL-VPN: Upgrading Firmware On SMA 500v Virtual Appliance