Navigating to System Logs Page

You can see the list of logs that have been created on the Monitor > Logs > System Logs page. You can access the system logs both in Manager View and Firewall View. You can use the Search option to search for a particular log.

You have a Time Range option that lets you customize the time duration of the report. The Limit drop down is used to set the limit of the number of displayed logs. You can further filter the graph according to a specific time by using the Time Slider which is present above the graph.

You can also click on Refresh button to refresh the information on the page and export the table in CSV format using the Export button. The columns of the table can be edited using the Grid Settings button at the top of the page.

The logs categories in the list have been color coded which can be viewed on the extreme left column.

You can expand each of the logs to see additional information such as event ID, category, event name, message, priority, source IP, destination IP etc.

Only the following Priority levels for System Logs are supported for egressing to NSM SaaS - Alerts, Critical, Error, and Warning. For a log priority to show up in NSM SaaS, its IPFIX setting has to be enabled on the Log > Settings page of the Device View.