Registering CSE Activation Keys in MySonicWall

To register a CSE license, sign into your MySonicWall account. If you have not signed up for a MySonicWall account, refer to the KB article, How do I create a MySonicWall.com account?

You can also refer to the video at SonicWall University to see how use activation keys to register a Cloud Secure Edge license.

To register a Cloud Secure Edge in MySonicWall

1. Login to MySonicWall.
2. Navigate to My Workspace > Register Products.
3. Select a Tenant under which you want to register a Cloud Secure Edge.
4. Enter your Cloud Secure Edge Activation key in the box with Serial Number/Activation Key/Assign Token. If you have both a SIA and SPA key, you can shoose either one for this step.

5. Enter a friendly name for the Cloud Secure Edge to identify in the Products list.

   

6. Enter a unique Cloud Secure Edge Name to identify on the CSE portal.

   Follow the below criteria to define the name:

   • Name should start with a letter.
   • Only lowercase letters a-z, numbers 0-9, and hyphen (-) are allowed.
   • The length of the name should be between 4 and 30 characters.

7. Update the Data Center Location if required.

   By the default, the Data Center Location is selected.

8. Click Done.

    

   • On successful registration, you get a Success message on the page. However, the CSE provisioning takes several minutes to complete.
   • You get an email notification on successful provisioning, and service is available on Capture Security Center.
   • You can view the registered license under MyWorkspace > Products.

   

   To use Connector on the SonicWall firewall, make sure that the firewall is registered under the same MSW tenant as the CSE license. The firewall does not need a license to use the Connector. A licensed CSE product under the same MSW tenant is sufficient.

9. If you have a second activation key to apply, navigate to MyWorkSpace > Products, find and click on your CSE Serial Number > License Details. You can input your second key here to activate both SPA and SIA on the same serial number.

   

10. After you receive the confirmation email, launch CSE from the Capture Security Center.

    1. Navigate to Capture Security Center and log in.
    2. In MySonicWall, navigate to Services > Available Services.

    3. Hover over the Capture Security Center and click Launch.

       

11. Select your tenant in the Capture Security Center portal.

    If your tenant or product is unavailable, click the Refresh icon and check the dashboard.

12. Click the Cloud Secure Edge icon to use your single sign-on (SSO) credentials to log into the product console, also known as the CSE Command Center.

    

For more information, refer to SonicOS Cloud Secure Edge Feature Guide.