SonicOS 7 System

Technical Documentation>  VLAN Translation>  Creating and Managing VLAN Maps>  Creating a VLAN Map>  Creating a Wire Mode Pair in Secure Mode
Table of Contents

Creating a Wire Mode Pair in Secure Mode

To create a Wire Mode pair in secure mode

  1. Navigate to NETWORK | System > Interfaces.

Interface Settings

  1. Click the Edit icon for the interface to be part of the Wire Mode pair. The Edit Interface dialog displays.
  2. Select the zone for the Wire Mode pair from Zone. The options change.
  3. Select Wire Mode (2-Port Wire) from Mode / IP Assignment. The options change again.
  4. Select Secure (Active DPI of Inline Traffic) from Wire Mode Type.
  5. Select the interface to pair with the current interface from the Paired Interface drop-down menu.

Ensure the interface you pair with is unassigned.

  1. Select the zone for the paired interface from Paired Interface Zone. The default is LAN.
  2. Configure the other options as if configuring a regular Wire Mode pair as described in Configuring Wire and Tap Mode.
  3. Click OK. The NETWORK | System > Interfaces page is updated.
Chat