SonicOS 7 System

Technical Documentation>  Dynamic Routing>  RIP
Table of Contents

RIP

NETWORK | System > Dynamic Routing > RIP, which displays only when Advanced Routing Mode is chosen for Routing Mode, shows the status of RIP and allows you to configure RIP for an interface.

Settings Icon that displays the Settings pop-up for configuring the metrics for default routes.
Interface (Zone) Interfaces and their zone configured for RIP. If a zone has not been configured for an interface, the (Zone) designation is (N/A).
RIP

Indicates whether RIP is enabled on an interface:

  • RIP Enabled
  • RIP Enabled (passive)
  • RIP Disabled
Configure RIP Displays the Edit icon for the interface.