SonicOS 7 System

Technical Documentation>  Interfaces>  Interface Settings IPv4>  Configuring Wire and Tap Mode>  Configuring Wire Mode for a WAN/LAN Zone Pair
Table of Contents

Configuring Wire Mode for a WAN/LAN Zone Pair

The following configuration is an example of how Wire Mode can be configured. This example is for a WAN zone paired with a LAN zone. Wire Mode can also be configured for DMZ and custom zones.

To configure Wire Mode for a WAN/LAN Zone Pair

  1. Navigate to NETWORK | System > Interfaces.
  2. Click one of these:
    • Add Interface.
    • Configure icon for the interface you want to configure.

The Add/Edit Interface dialog displays.

  1. From IP Assignment, select Wire Mode (2-Port Wire).
  2. From Zone, select WAN.
  3. From Paired Interface Zone, select LAN.
  4. Select Disable Stateful Inspection.
  5. Select Enable Link State Propagation.
  6. Click OK. The Interface Settings table is updated.