SonicOS 8 Rules and Policies for Classic Mode

Table of Contents

Configuring Routing Rules

You can configure the SonicWall firewall to route network traffic to specific predefined destinations. You must define static routes if the network connected to an interface is segmented into subnets, either for size or practical considerations. For example, a subnet can be created to isolate a section of a company, such as finance, from network traffic on the rest of the LAN, DMZ, or WAN.

When configuring a static route, you can optionally configure a Network Monitor policy rule for the route. When you use a Network Monitor policy rule, the firewall dynamically disables or enables the static route based on the state of the probe for the policy rule. For more information, see Probe-Enabled Policy-based Routing Configuration.