SonicOS 8 Rules and Policies for Classic Mode

Table of Contents

App-based Routing

App-based Routing is a policy-based forwarding (PBF) rule. The rule lets traffic take an alternative path from the next hop that the route table specifies. You typically use it to specify an egress interface for security or performance reasons.

When an App-based Route entry is created, the firewall initially does not have enough information to identify the application and cannot enforce the route entry. As more packets arrive, the firewall determines the application and creates an internal entry in the App-ID cache, which the firewall keeps for the session. When a new session uses the same destination IP address, destination port, and protocol ID, the firewall can identify the application as the same as in the initial session and apply the App-based Route. Therefore, a session that is not an exact match and is not the same application, cannot be forwarded based on the App-based Route.

In SonicOS 8.2.3 and later, you can also route by SaaS App. SaaS App routing matches the destination IP address on the first packet, so the firewall does not need an App-ID cache. The App option requires App Control.

This feature is available only when Gateway AV/Anti-Spyware/Intrusion Prevention/App Control/App Visualization is licensed and App Control is enabled in POLICY | Rules and Policies > Routing Rules.