• SonicOS and SonicOSX 7
• About SD-WAN
• SD-WAN Groups
  • About SD-WAN Groups
  • Configuring SD-WAN Groups
    • Creating an SD-WAN Group
    • Editing an SD-WAN Group
    • Deleting an SD-WAN Group
    • Deleting Multiple SD-WAN Groups
• Performance Probes
  • About Performance Probes
  • Configuring Performance Probes
    • Adding SD-WAN Performance Probes
    • Editing an SD-WAN Performance Probe
    • Deleting an SD-WAN Performance Probe
    • Deleting Multiple SD-WAN Performance Probes
• Performance Class Objects
  • About Performance Class Objects
  • Configuring SD-WAN Performance Class Objects
    • Adding an SD-WAN Performance Class object
    • Editing an SD-WAN Performance Class Object
    • Deleting an SD-WAN Performance Class Object
    • Deleting Multiple SD-WAN Performance Class Objects
• Path Selection Profiles
  • About Path Selection Profiles
  • Configuring Path Selection Profiles
    • Adding Path Selection Profile
    • Editing a Path Selection Profile
    • Deleting a Path Selection Profile
    • Deleting Multiple Path Selection Profiles
• SD-WAN Route Policies
  • About SD-WAN Route Policies
  • Configuring SD-WAN Route Policies
    • Adding SD-WAN Route Policies
    • Editing SD-WAN Route Policies
    • Deleting SD-WAN Route Policies
    • Deleting Multiple SD-WAN Route Policies
• Monitoring SD-WAN
• Viewing SD-WAN Route Policy Connections

Monitoring SD-WAN

A chart may be empty or blank if there are no recent data entries received within the viewing range.

To monitor SD-WAN performance

1. Navigate to Monitor | SD-WAN > SDWAN Monitor.
2. From SD-WAN Probes drop-down box, select the performance probe you would like to use to monitor.
3. Indicate the Refresh rate, in seconds, in the Refresh Every field.
4. Select a View Range:
   • 60 seconds (default)
   • 2 minutes
   • 5 minutes
   • 10 minutes
5. Choose an interface to track or select All Interfaces from the drop-down menu on the right side.
6. The two small icons on the right allow you to toggle between line and block displays.