SonicOS/X 7 SD-WAN
About SD-WAN Groups
SD-WAN supports physical and virtual WAN interface types as well as VPN Numbered and Unnumbered Tunnel Interface instances, all choices provided while creating SD-WAN group.
Numbered Tunnel Interface groups are more evolved versions of the route-based implementations, and they are also far more intuitive to work with. However, they do scale poorly as they borrow from other actual entries in the interface table. Unnumbered Tunnel Interface configurations can meet the necessary scalability requirements because they are not tied to an interface table entry.
SD-WAN Groups are logical groups of interfaces that can be used for load-balancing as well as dynamic path selection based on the performance criterion through each interface path. You can create your own custom groups. For a description of SonicOS SD-WAN and its features, see About SD-WAN.
The SD-WAN Groups page displays the custom pool of interfaces used for optimized and resilient traffic flow.
Name | Name of the SD-WAN group. |
Zone |
The zone of the interface member:
|
IP Address | IP address of the interface. |
Link Status |
Indicates whether the link is:
|
Priority | Priority of the interface in the group. |
Was This Article Helpful?
Help us to improve our support portal