• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Requirements
  • Files for Installation
  • Creating a MySonicWall Account
• Installing the SMA 500v for Hyper-V Virtual Appliance
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Downloading the SMA 500v for Hyper-V Virtual Appliance Software
  • Installing SMA 500v for Hyper-V
• Configuring the SMA 500v for Hyper-V Virtual Appliance
  • Connecting to the Console
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for Hyper-V
  • Registering an SMA 500v for Hyper-V in a Closed Network
  • De-registering an SMA 500v for Hyper-V
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

De-registering an SMA 500v for Hyper-V

You can de-register an SMA 500v for Hyper-V directly from the Secure Mobile Access interface. Removing the registration puts the virtual appliance into an unregistered state and deletes the binding between it and its serial number in MySonicWall. At that point, you can use that serial number to register the same or another SMA 500v for Hyper-V instance. Only one SMA 500v for Hyper-V instance is allowed per serial number.

To De-register an SMA 500v for Hyper-V

1. Log into the Secure Mobile Access management interface on your SMA 500v for Hyper-V Virtual Appliance.
2. Navigate to the System > Settings page.

3. Under Settings Management, click Export Settings to export a copy of your current configuration settings before de-registering your SMA 500v for Hyper-V. This makes it possible to import these settings to another SMA 500v for Hyper-V instance.

   Be sure to export your configuration settings before de-registering your SMA 500v for Hyper-V. You cannot recover them after de-registration.

4. Navigate to System > Licenses.
5. Under Manage Security Services Online, click Activate, Upgrade, or Renew services and log into your MySonicWall account.
6. Navigate to Product Management > My Products, and select the SMA 500v for Hyper-V you would like to de-register. Click Delete Product on the far right of the row. A dialog box appears requesting the reason.
7. Click Confirm.
8. If the de-registration is successful, the SMA 500v for Hyper-V returns to the unregistered state.