• Secure Mobile Access 10.2
• Introduction
• Before You Begin
  • Supported Platforms
  • Requirements
  • Files for Installation
  • Creating a MySonicWall Account
• Installing the SMA 500v for Hyper-V Virtual Appliance
  • Preparing the Windows Server System
  • Creating Virtual Switches in Hyper-V
  • Downloading the SMA 500v for Hyper-V Virtual Appliance Software
  • Installing SMA 500v for Hyper-V
• Configuring the SMA 500v for Hyper-V Virtual Appliance
  • Connecting to the Console
  • Using the Command Line Interface
    • Setup Wizard
    • Reboot
    • Restart SSL VPN Services
    • Logout
    • Save TSR to Flash
    • Display EULA
  • Configuring Settings on the Appliance Web Interface
• Licensing and Registering Your Appliance
  • Registering the SMA 500v for Hyper-V
  • Registering an SMA 500v for Hyper-V in a Closed Network
  • De-registering an SMA 500v for Hyper-V
• Using the 30-day Trial Version
  • Deployment Considerations
  • Registering the 30-day Trial Virtual
  • Converting a Free Trial License to Full
• Upgrading Your Appliance
  • Obtaining the Latest Image Version
  • Exporting a Copy of Your Configuration
  • Uploading a New Image
• SonicWall Support
  • About This Document

Connecting to the Console

To Start, Connect, and Shut Down SMA 500v for Hyper-V

1. Click SMA 500v for Hyper-V in the Virtual Machines list.
2. If the State is Off, right-click to bring up the Start dialog box.

3. Click Start to start the machine.

   

4. When Hyper-V is fully booted, click your SMA 500v for Hyper-V in the Virtual Machines list to connect.
5. Right-click to bring up the dialog box.

6. Click Connect.

   

7. The console screen appears, and a login prompt is displayed.
8. To access the Command Line Interface, log in as admin. The password is the same as the password for the “admin” account configured on the appliance. The default is password.
9. If the incorrect credentials are used, you can try again at the prompt.

10. Press Enter. This launches CLI.

    

11. To shut down when the State is Running, right-click on the machine in the list to bring up the Shut Down dialog box.

12. Click Shut Down to shut down the machine.