Network Security Manager On-Premises System Administration Guide
- Network Security Manager On-Premises System
- About Network Security Manager
- Dashboard
- Settings
- Licenses
- Administration
- Time
- Certificates
- Common Access Card (CAC) Authentication
- Diagnostics
- Firmware and Settings
- Backups/Restore Feature
- Configure a Scheduled NSM File System Backup
- Configure a Scheduled NSM File System Backup via SCP
- View NSM File System Backups
- Create a NSM File System Backup
- Create SCP of a NSM File System Backup
- Import a NSM File System Backup
- Export a NSM File System Backup
- Delete a NSM File System Backup
- Restore NSM to a File System Backup
- Backup/Restore NSM using Safemode
- Zero Touch
- Shutdown/Reboot
- Closed Network
- Network
- System Monitor
- High Availability
- NSM Management Console
Firmware and Settings
Manage your NSM firmware on the Firmware and Settings page. Navigate to System | Settings > Firmware and Settings.
The table lists key statistics about the firmware like File Name, Load Date, Version and Actions that can be performed.
The columns on the table can be customized by clicking Column Selection and checking which columns you want to appear.
Firmware can be upgraded through this page for NSM 2.3.4 and higher versions.
Other actions include:
| Import/Export Settings | Use this command to import or export the firmware settings. |
| Upload Firmware | Use this command to upload a new firmware version and upgrade the system using a .swi file. |
| Factory Reset | Use this command to factory reset the NSM system. |
Was This Article Helpful?
Help us to improve our support portal