Diagnostics Tests

The diagnostics tests tab provides the tools to validate connectivity, trace routes and ping an IP address.

Use the Connectivity tests to validate connectivity to the systems listed in the table. Check the test you want to run and click on the link Test All or Test Selected. The results are reported in the table as shown below:

Click on the information icon next to License Manager Connectivity to see the name of the License Manager Host.

To trace a route

1. Click on the tab Trace Route.
2. Enter the IP address for the host you are tracing.
3. Click Go.

To ping an address

1. Click on the tab Ping.
2. Enter the IP address for the device you are pinging.
3. Click Go.