• Network Security Manager On-Premises System
• About Network Security Manager
  • About NSM
  • About the System Option
  • Conventions
    • Guide Conventions
    • UI Conventions
  • Related Documents
• Dashboard
  • System Information
  • CPU Usage
  • Memory Usage
  • Network Interfaces
  • Disk Usage
  • Active Users
• Settings
  • Licenses
  • Administration
  • Time
    • Setting Time
    • Adding an NTP Server
    • Deleting an NTP Server
  • Certificates
  • Common Access Card (CAC) Authentication
  • Diagnostics
    • Diagnostics Tests
    • Tech Support Report
  • Firmware and Settings
  • Backups/Restore Feature
    • Configure a Scheduled NSM File System Backup
    • Configure a Scheduled NSM File System Backup via SCP
    • View NSM File System Backups
    • Create a NSM File System Backup
    • Create SCP of a NSM File System Backup
    • Import a NSM File System Backup
    • Export a NSM File System Backup
    • Delete a NSM File System Backup
    • Restore NSM to a File System Backup
    • Backup/Restore NSM using Safemode
  • Zero Touch
  • Shutdown/Reboot
  • Closed Network
• Network
  • Settings
  • Interface
  • Routes
• System Monitor
  • Settings
  • Live Monitor
  • Process/Service Monitor
  • System Report
• High Availability
  • Status
  • Settings
  • Advanced Settings
  • Virtual IP
  • HA Modes and Terminologies
  • Backup/Restore in High Availability Setup
    • Configure a Scheduled Backup in High Availability Setup
    • Restore Feature in High Availability Setup
• NSM Management Console
  • Upgrade Instructions using Upgrade Package
  • Upgrade Instructions without Upgrade Package

Settings

You can set up your host and DNS servers by navigating to System | Network > Settings.

To setup the host

1. In the Host section, input the server Name in the field provided.
2. Add the Domain name.
3. Click Accept.

To set up a DNS server

1. In the DNS section, input the IP address in the field provided. You can add IP addresses for up to three DNS server.
2. Click Accept.