Network Security Manager On-Premises System Administration Guide

Routes

Use the Routes page to manage the network routes for your NSM implementation. Navigate to System | Network > Routes. You can add, edit or delete the routes.

To add a route

  1. Click the +Add icon.

  2. Add a name for the Destination Network.
  3. Input the Netmask.
  4. Enter the Gateway Address.
  5. Select the Egress Interface from the drop-down list.
  6. Click Add.

To edit a network route

  1. Select the route that you want to edit.
  2. In the Action column, click the Action icon and select Edit.

    You cannot edit the default routes.

  3. Make changes to fields as needed.
  4. Click Save.

To delete a network route

  1. Select the route that you want to delete.
  2. In the Action column, click the Action icon and select Delete. Or you can click on the Delete icon above the table.

    You cannot delete the default routes.

    You can delete multiple routes at once by checking the boxes to the right of the names and clicking the Delete icon.

  3. Confirm the delete as needed.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.