Network Security Manager On-Premises System Administration Guide

Technical Documentation > Network Security Manager On-Premises System Administration Guide > Network > Routes

Routes

Use the Routes page to manage the network routes for your NSM implementation. Navigate to System | Network > Routes. You can add, edit or delete the routes.

To add a route

Click the +Add icon.
Add a name for the Destination Network.
Input the Netmask.
Enter the Gateway Address.
Select the Egress Interface from the drop-down list.
Click Add.

To edit a network route

Select the route that you want to edit.
In the Action column, click the Action icon and select Edit.

You cannot edit the default routes.
Make changes to fields as needed.
Click Save.

To delete a network route

Select the route that you want to delete.
In the Action column, click the Action icon and select Delete. Or you can click on the Delete icon above the table.

You cannot delete the default routes.

You can delete multiple routes at once by checking the boxes to the right of the names and clicking the Delete icon.
Confirm the delete as needed.

< Previous Section Next Section >

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Network Security Manager On-Premises System Administration Guide

Routes

Was This Article Helpful?

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

Stay In Touch