Network Security Manager On-Premises System Administration Guide
- Network Security Manager On-Premises System
- About Network Security Manager
- Dashboard
- Settings
- Licenses
- Administration
- Time
- Certificates
- Common Access Card (CAC) Authentication
- Diagnostics
- Firmware and Settings
- Backups/Restore Feature
- Configure a Scheduled NSM File System Backup
- Configure a Scheduled NSM File System Backup via SCP
- View NSM File System Backups
- Create a NSM File System Backup
- Create SCP of a NSM File System Backup
- Import a NSM File System Backup
- Export a NSM File System Backup
- Delete a NSM File System Backup
- Restore NSM to a File System Backup
- Backup/Restore NSM using Safemode
- Zero Touch
- Shutdown/Reboot
- Closed Network
- Network
- System Monitor
- High Availability
- NSM Management Console
Diagnostics Tests
The diagnostics tests tab provides the tools to validate connectivity, trace routes and ping an IP address.
Use the Connectivity tests to validate connectivity to the systems listed in the table. Check the test you want to run and click on the link Test All or Test Selected. The results are reported in the table as shown below:
Click on the information icon next to License Manager Connectivity to see the name of the License Manager Host.
To trace a route
- Click on the tab Trace Route.
- Enter the IP address for the host you are tracing.
- Click Go.
To ping an address
- Click on the tab Ping.
- Enter the IP address for the device you are pinging.
- Click Go.
Was This Article Helpful?
Help us to improve our support portal