SonicOS 8 Users

Table of Contents

Enrolling Administrators in Two-Factor Authentication

Two-factor authentication (2FA) adds a critical layer of security to administrative access. SonicOS 8.2.3 introduces a guided 2FA enrollment workflow for all administrator accounts:

  • New or factory-reset firewalls: The Setup Wizard includes a mandatory step to configure a new administrator password, followed by an optional prompt to enroll in Time-based One-Time Password (TOTP) authentication. Administrators can complete enrollment immediately or skip this step and configure 2FA later.
  • Upgraded firewalls: For firewalls upgraded from an earlier firmware version, a persistent advisory banner displays in the management interface prompting administrators to enable 2FA until enrollment is configured or dismissed.

Network Security Manager (NSM) Onboarding and MFA

Zero-Touch (ZT) onboarding is the recommended method for onboarding a firewall to Network Security Manager (NSM).

If you choose to manually onboard a firewall to NSM using administrator credentials, MFA must be disabled for the administrator account used for NSM management. An administrator account with MFA enabled cannot be used for manual NSM onboarding.

To maintain MFA protection for administrative access, SonicWall recommends using Zero-Touch onboarding when onboarding a firewall to NSM.

Supported MFA Methods

Method Description
TOTP Time-based One-Time Password — compatible with Google Authenticator, Microsoft Authenticator, Authy, and any RFC
OTP via Email One-time code sent to the registered admin email address
Scratch / Recovery Codes One-time use backup codes generated at TOTP enrollment