SonicOS 8 Users

Table of Contents

Configuring the CA on the Active Directory Server

Skip steps 1 through 6 if Active Directory Certificate Services (AD CS) is already installed in your domain.

  1. On the domain controller, open Server Manager, click Manage in the upper-right corner, and select Add Roles and Features.
  2. Click Next through the installation type and server selection pages, then on the Server Roles page, select Active Directory Certificate Services. Click Add Features when prompted, then click Next.
  3. On the Role Services page, select Certification Authority, click Next, and then click Install.
  4. When installation finishes, click the notification flag at the top of Server Manager and select Configure Active Directory Certificate Services on the destination server.
  5. In the configuration wizard:
    • Select Certification Authority on the Role Services page.
    • Select Enterprise CA on the Setup Type page.
    • Select Root CA on the CA Type page.
    • Follow the remaining prompts to generate a new private key with RSA (at least 2048-bit, 4096-bit recommended) and SHA256 or higher, and click Configure.
  6. Restart the domain controller after configuration completes to ensure the Enterprise CA automatically provisions and binds the server authentication certificate to Active Directory.

In an Active Directory domain with an Enterprise Root CA, domain controllers automatically request and enroll a Domain Controller / Kerberos Authentication certificate for LDAPS upon reboot. If automatic certificate enrollment is not yet enabled in your domain, configure it using Group Policy:

  1. Press Win + R, enter gpmc.msc, and press Enter to open the Group Policy Management Console.
  2. In the left navigation pane, expand your forest and domain, expand Domain Controllers, right-click Default Domain Controllers Policy, and select Edit.
  3. In the Group Policy Management Editor, navigate to:
    Computer Configuration > Policies > Windows Settings > Security Settings > Public Key Policies
  4. In the right pane, double-click Certificate Services Client - Auto-Enrollment.
  5. Set Configuration Model to Enabled.
  6. Select the following check boxes:
    • Renew expired certificates, update pending certificates, and remove revoked certificates
    • Update certificates that use certificate templates
  7. Click Apply, then click OK.
  8. Open Command Prompt as Administrator and run gpupdate /force to immediately apply the policy.