SonicOS 8 Security Services Administration Guide

Table of Contents

IPS Global Settings

The IPS Global Settings allows you to configure intrusion prevention detection and prevention thresholds, global reset behaviors, and appliance self-protection options across network traffic.

While Intrusion Prevention Service (IPS) is enabled across active zones upon device registration as part of SonicWall's secure-by-default initiative (Phase 1), SonicOS 8.2.3 enhances this protection by introducing Stack Traffic Inspection. In new (greenfield) installations, stack traffic inspection is enabled by default to protect the firewall’s own management interfaces against targeted exploits. On firewalls upgraded from earlier releases (brownfield), existing IPS rules and zone policies are preserved, and stack traffic inspection remains disabled until manually enabled. For more information, see Secure-by-Default (Phase 1).

  • Enable IPS - Turn on Enable IPS to enable Intrusion Prevention Service globally on the firewall. To apply IPS protection to a specific zone, also enable Enable IPS in that zone’s settings on the Object > Match Objects > Zones page.

  • The next section allows you to configure the level of attack to monitor and in what way. You can set different levels of protection for High Priority Attacks, Medium Priority Attacks, and Low Priority Attacks.
    • Prevent All - Select this option to detect, log, and prevent all attacks of this level.
    • Detect All - Select this option to detect and log only.
    • Log Redundancy Filter (Seconds) - To prevent the log from becoming overloaded with entries for the same attack, enter a value in the field. For example, if you entered a value of 30 seconds and there were 100 SubSeven attacks during that period of time, only one attack would be logged during that 30 second period.
    • Configure IPS Settings - This is one of four buttons below the attack level chart. It brings up the following dialog box.
      • IPS Exclusion List
      • Enable IPS Exclusion List - Select this field to configure the SonicWall security appliance to skip Intrusion Prevention enforcement for a specified IP address object or range of address objects. The fields that follow are only available when this field is selected.
        • Use Address Object — Select an address object from the drop-down menu.
        • Use Address Range —Fill in the address range limits to exclude. If the address range is selected, you can Add or Delete All of the choices.
  • Update IPS Signature Database - Select to force the firmware to download all signatures.
  • Reset IPS Settings & Policies - Click to reset your IPS settings to the defaults.
  • Import CSV File - This button imports the CSV file.
  • Click OK or Cancel when you are done with this page.