SonicOS 8 Security Services Administration Guide

Table of Contents

Secure-by-Design (Phase 2)

SonicOS 8.2.3 introduces Secure-by-Design (Phase 2), a set of enhancements to the default security configuration for new firewall deployments. New firewalls block unsolicited inbound traffic by default, before administrators create custom access rules. This behavior is known as implicit deny — traffic is blocked unless an access rule explicitly allows it.

Phase 2 delivers the following default security enhancements:

  • Stealth Mode— Enabled by default on new installations. The firewall does not respond to blocked inbound connection requests, making port scans less effective. This setting does not suppress responses to blocked outbound traffic from trusted zones. For configuration information, refer to Detection Prevention in the SonicOS 8 Firewall Administration Guide.

  • IP ID Randomization— enabled by default on new installations. It randomizes the IP Identification values of firewall-generated IPv4 packets to make operating-system fingerprinting more difficult. This setting does not affect IPv6 traffic. For configuration information, refer to Detection Preventionin the SonicOS 8 Firewall Administration Guide.

  • Default Deny Rules to Discard—On new installations and factory-default configurations, automatically created default inbound inter-zone blocking rules use Discard instead of Deny. Discard silently drops packets without sending a TCP reset or ICMP unreachable response. Blocked outbound traffic initiated from trusted zones continues to use Deny behavior to support troubleshooting. Existing default rules retain their configured action after an upgrade; default inter-zone drop rules generated for newly created zones use Discard.

  • SSL Control— Enabled by default with event logging on new GEN8 hardware deployments. SSL Control evaluates SSL/TLS handshake information and logs detected policy violations; it does not decrypt or inspect encrypted application data. Other platforms retain their previous defaults, and upgrades preserve existing SSL Control settings. For configuration information, refer to Configuring SSL Control in the SonicOS 8 Firewall Administration Guide.

  • Admin 2FA Enforcement— On first login after a factory reset, administrators must change their password and can optionally enroll in time-based one-time password (TOTP) authentication using an authenticator application. TOTP enrollment is recommended but can be skipped. After an upgrade, administrators receive a recommendation to enable MFA; dismissing the recommendation does not prevent it from appearing on subsequent logins. For instructions, see Greenfield Enrollment Flow (Factory Reset) and Configure MFA for an Existing Administrator in the SonicOS 8 Users Administration Guide.

  • MFA Alerting for Remote Access Users— An administrator-only warning appears on Network > SSL VPN > Server Settings when SSL VPN users or groups are configured without MFA. The warning provides configuration guidance and reappears the next time the page is accessed if dismissed. These alerts are advisory and do not block connections. For details, see MFA Alerting for Remote Access Users

    For firewalls manually onboarded to Network Security Manager (NSM) using administrator credentials, MFA must remain disabled for the administrator account used by NSM. Zero-Touch onboarding is the recommended method for NSM-managed firewalls.

Design Philosophy

  • New installations (Greenfield Deployments— New and factory-reset firewalls use the applicable Phase 2 defaults described above. Administrator TOTP enrollment remains optional, and the SSL Control default is subject to the platform restriction.

  • Upgrades (Brownfield Deployments)— Existing configurations are preserved. SonicOS provides recommendations and alerts to help administrators review MFA settings and enable recommended protections. Default inter-zone drop rules created for new zones after an upgrade use Discard.

Known Limitations

  • Firmware downgrade or rollback to an earlier version is not supported after SonicOS 8.2.3 settings are applied.

  • Console access — Two-factor authentication (2FA) is not required for administrator access through the physical console (serial port). The console remains available as a hardware recovery path. Username and password authentication is still required.

  • MFA alerts — Multifactor authentication (MFA) alerts for remote access users are advisory only. The alerts do not themselves block connections or enforce MFA. Other configured security policies continue to apply.

  • SSL Control defaults — Automatic enablement of SSL Control applies only to new deployments on eighth-generation SonicWall firewall hardware (Gen8). Other platforms retain their previous defaults. Existing SSL Control configurations are preserved during upgrades.

  • IP ID Randomization — IP ID Randomization applies to IPv4 traffic only. It does not affect IPv6 traffic.

  • The Phase 2 administrator MFA feature does not enforce MFA for administrators authenticated through external RADIUS or LDAP authentication servers. SonicOS does not automatically detect whether the external authentication system has performed MFA.