03/26/2020 15 People found this article helpful 455,169 Views
The video on YouTube is available.
This article shows you how to do the wireless client access control by MAC address when using SonicPoint VAP.
In this case, the AP (access point) name is VAP, a mobile phone is connected to the AP.
To configure the Global ACL Settings, go to SonicPoint > SonicPoints | Click the edit button of the SonicPoint you are interested in at SonicPointNs area | ACL Enforcement can be configured in tab Radio Basic.
NOTE: It is recommended that the Allow List be set to All MAC Addresses.
?NOTE: It is recommended that the Deny List be set to Default SonicPoint ACL Deny Group.
To configure the Object Group, please follow below steps:
Step 1: Go to Firewall | Address Objects page. Edit Default ACL Deny Group or add a custom object group at Address Groups area.
Step 2: Click the edit button of the group | add/remove the relevant MAC address object of the wireless client.
How to test:
In this case, the mobile client MAC address has been added to the Default SonicPoint ACL Deny Group.
Selected Default SonicPoint ACL Deny Group from the Deny List, Mobile client disconnected from the AP.