Setting the NTP Server

To set the NTP Server

This feature is supported in SonicOS 8.1 and higher versions.

1. Navigate to Device | Settings > Time.

2. Click on the Settings screen, to use the manually entered list of NTP servers to set the firewall clock rather than the internal list of NTP servers, select Only use custom NTP servers.

   Select this option only if you have configured one or more NTP servers. For more information about NTP servers, see Configuring NTP Servers.

3. To setup the device as local NTP server.
   1. Select Setup device as a local NTP server

   2. Choose your preferred Interface or Zone from the Listen on Interfaces/Zones drop-down. The option helps us to use the Interface IP as the NTP server IP.

      

4. Click Accept.