SonicOS 7 System

Creating and Managing VLAN Maps

NETWORK | System > VLAN Translation allows you to create and manage the VLAN mapping of interfaces.

Add icon Displays the Add VLAN Translation dialog.
Delete icon

Displays the Delete drop-down menu:

  • Delete Selected
  • <![CDATA[ ]]>Delete All
Search field Allows you to display only those VLAN translations of interest.
Refresh icon Refreshes the VLAN Translation table.
Policy number and checkbox Number of the policy and its associated checkbox.
Ingress Interface Name of the incoming interface.
Ingress VLAN VLAN tag of the incoming interface.
Egress Interface Name of the interface to which traffic is mapped.
Egress VLAN VLAN tag of the interface to which traffic is mapped.
Reverse Translation

Indicates whether the mapping is unidirectional or bidirectional:

  • <![CDATA[ ]]>Disabled – Unidirectional; column blank.
  • <![CDATA[ ]]>Enabled – Bidirectional; green checkmark.
Active

Status of the mapped pair:

  • <![CDATA[ ]]>Active – The Wire Mode pair is mapped and active; green checkmark.
  • <![CDATA[ ]]>Inactive – The Wire Mode pair is mapped but not active (pre-provisioned); column blank.
Configure Displays Edit and Delete icons for a mapped pair.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden