SonicOS 7 System

Technical Documentation > SonicOS 7 System >

Provisioning an N-Series Switch as an Extended Switch

PoE-related fields are configurable only on PoE models of N-series switches.

On a standalone Series system, provisioning of an Extended Switch specify these Extended Switch parameters:

Mandatory Parameters		Optional Parameters
ID	Username	Firewall Uplink	PoE Usage Threshold
Switch Model	Password	Switch Uplink	PoE Management Mode
IP Address	Switch Management	STP Mode	PoE Detection Type
		STP State

On a TZ Series system with High Availability enabled, an Extended Switch can be added by specifying these Extended Switch Parameters:

Mandatory Parameters		Optional Parameters
ID	Username	STP Mode	PoE Usage Threshold
Switch Model	Password	STP State	PoE Management Mode
IP Address	Switch Management		Detection

The Firewall Uplink and Switch Uplink parameters are not relevant for an appliance operating in High Availability mode. Currently, the mandatory parameters cannot be modified after configuration.

< Previous Section Next Section >

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

SonicOS 7 System

Provisioning an N-Series Switch as an Extended Switch

Was This Article Helpful?

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

Stay In Touch