SonicOS 7 Match Objects
- SonicOS 7
- Zones
- How Zones Work
- Predefined Zones
- Security Types
- Allow Interface Trust
- Enabling SonicWall Security Services on Zones
- Effect of Wireless and Non-Wireless Controller Modes
- Match Objects > Zones
- The Zone Settings Table
- Adding a New Zone
- Configuring a Zone for Guest Access
- Configuring a Zone for Open Authentication and Social Login
- Configuring a Zone for Captive Portal Authentication with RADIUS
- Configuring a Zone for Customized Policy Message
- Configuring a Zone for Customized Login Page
- Configuring the WLAN Zone
- Configuring the RADIUS Server
- Configuring DPI-SSL Granular Control per Zone
- Enabling Automatic Redirection to the User-Policy Page
- Deleting a Zone
- Addresses
- Types of Address Objects
- About Address Groups
- About UUIDs for Address Objects and Groups
- Addresses Page
- Default Address Objects and Groups
- Default Pref64 Address Object
- Default Rogue Address Groups
- Adding an Address Object
- Editing Address Objects
- Deleting Custom Address Objects
- Purging MAC or FQDN Address Objects
- Creating Address Groups
- Editing Address Groups
- Deleting Address Groups
- Working with Dynamic Address Objects
- Services
- About Default Service Objects and Groups
- Predefined IP Protocols for Custom Service Objects
- Adding Service Objects using Predefined Protocols
- Adding Custom IP Type Services
- Editing Custom Service Objects
- Deleting Custom Service Objects
- Adding Custom Service Groups
- Editing Custom Service Groups
- Deleting Custom Service Groups
- URI Lists
- Match Objects
- Schedules
- Dynamic Group
- Email Addresses
- SonicWall Support
Configuring a Zone for Captive Portal Authentication with RADIUS
To configure captive portal authentication with RADIUS
-
On the Zone Settings dialog, click Guest Services tab.
- Select Enable Guest Services option. The options become available.
- Select Enable Captive Portal Authentication. Configure becomes available.
-
Click Configure.
- In the Custom Portal Authentication Settings section:
- Enter the internal captive portal vendor’s URL in the Internal Captive Portal Vendor URl field.
- Enter the external captive portal vendor’s URL in the External Captive Portal Vendor URl field.
- In the Radius Server Attributes Settings section:
Select the source for the captive portal welcome URL from Captive Portal Welcome URL Source:
- From Radius (default); go to Step c
- Custom; the next option becomes available
- Enter the welcome URL in the Custom Captive Portal Welcome URL field.
Select the source for the session timeout limit from Session Timeout Source:
- From Radius (default); go to Step f
- Custom; the next option becomes available
Select the type of session timeout duration from Custom Session Timeout:
- Minutes
- Hours
- Days (default)
- Enter the limit in the field.
Select the source for the idle timeout from Idle Timeout Source:
- From Radius (default); go to Step 7
- Custom; the next option becomes available
Select the type of idle timeout duration from Custom Session Timeout:
- Minutes
- Hours
- Days (default)
- Enter the limit of the duration in the field.
-
In the Radius Authentication Settings section, select the authentication method from Radius Authentication Method:
- CHAP (default)
- PAP – Encrypted
- PAP – ClearText
- Click Save.
Was This Article Helpful?
Help us to improve our support portal