SonicOS 7 Match Objects
- SonicOS 7
- Zones
- How Zones Work
- Predefined Zones
- Security Types
- Allow Interface Trust
- Enabling SonicWall Security Services on Zones
- Effect of Wireless and Non-Wireless Controller Modes
- Match Objects > Zones
- The Zone Settings Table
- Adding a New Zone
- Configuring a Zone for Guest Access
- Configuring a Zone for Open Authentication and Social Login
- Configuring a Zone for Captive Portal Authentication with RADIUS
- Configuring a Zone for Customized Policy Message
- Configuring a Zone for Customized Login Page
- Configuring the WLAN Zone
- Configuring the RADIUS Server
- Configuring DPI-SSL Granular Control per Zone
- Enabling Automatic Redirection to the User-Policy Page
- Deleting a Zone
- Addresses
- Types of Address Objects
- About Address Groups
- About UUIDs for Address Objects and Groups
- Addresses Page
- Default Address Objects and Groups
- Default Pref64 Address Object
- Default Rogue Address Groups
- Adding an Address Object
- Editing Address Objects
- Deleting Custom Address Objects
- Purging MAC or FQDN Address Objects
- Creating Address Groups
- Editing Address Groups
- Deleting Address Groups
- Working with Dynamic Address Objects
- Services
- About Default Service Objects and Groups
- Predefined IP Protocols for Custom Service Objects
- Adding Service Objects using Predefined Protocols
- Adding Custom IP Type Services
- Editing Custom Service Objects
- Deleting Custom Service Objects
- Adding Custom Service Groups
- Editing Custom Service Groups
- Deleting Custom Service Groups
- URI Lists
- Match Objects
- Schedules
- Dynamic Group
- Email Addresses
- SonicWall Support
Using MAC and FQDN Dynamic Address Objects
MAC and FQDN DAOs provide extensive access rule construction flexibility. MAC and FQDN AOs are configured in the same way as static address objects, that is from the Object > Match Objects > Addresses > Address Objects page. Once created, their status can be viewed by a mouse-over of their appearance, and log events will record their addition and deletion.
Dynamic address objects lend themselves to many applications. The following are just a few examples of how they may be used.
- Blocking All Protocol Access to a Domain using FQDN DAOs
- Using an Internal DNS Server for FQDN-based Access Rules
- Controlling a Dynamic Host’s Network Access by MAC Address
- Bandwidth Managing Access to an Entire Domain
Was This Article Helpful?
Help us to improve our support portal