• SonicOS and SonicOSX 7 IPSec VPN
• IPSec VPN Overview
  • About Virtual Private Networks
  • VPN Types
    • IPsec VPN
    • DHCP over VPN
    • L2TP with IPsec
    • SSL VPN
  • VPN Security
    • About IKEv1
    • About IKEv2
    • Mobility and Multi-homing Protocol for IKEv2 (MOBIKE)
    • About IPsec (Phase 2) Proposal
    • About Suite B Cryptography
  • VPN Base Settings and Displays
    • Policies
    • Active Tunnels
    • Settings
  • IPv6 VPN Configuration
• Site to Site VPNs
  • Planning Site to Site Configurations
  • General VPN Configuration
    • Configuring Settings on the General Tab
    • Configuring Settings on the Network Tab
    • Configuring Settings on the Proposals Tab
    • Configuring Settings on the Advanced Tab
  • Managing GroupVPN Policies
    • Configuring IKE Using a Preshared Secret Key
    • Configuring IKE Using 3rd Party Certificates
    • Downloading a GroupVPN Client Policy
  • Creating Site to Site VPN Policies
    • Configuring with a Preshared Secret Key
    • Configuring with a Manual Key
    • Configuring with a Third-Party Certificate
    • Configuring the Remote SonicWall Network Security Appliance
    • Configuring VPN Failover to a Static Route
• VPN Auto Provisioning
  • About VPN Auto Provisioning
    • Defining VPN Auto Provisioning
    • Benefits of VPN Auto Provisioning
    • How VPN Auto Provisioning Works
      • About Establishing the IKE Phase 1 Security Association
      • About Establishing IKE Phase 2 using a Provisioned Policy
  • Configuring a VPN AP Server
    • Starting the VPN AP Server Configuration
    • Configuring VPN AP Server Settings on General
    • Configuring VPN AP Server Settings on Network
    • Configuring Advanced Settings on Proposals
    • Configuring Advanced Settings on Advanced
  • Configuring a VPN AP Client
• Rules and Settings
  • Adding a Tunnel Interface
    • Creating a Static Route for the Tunnel Interface
  • Route Entries for Different Network Segments
  • Redundant Static Routes for a Network
• Advanced
  • Configuring Advanced VPN Settings
  • Configuring IKEv2 Settings
  • Using OCSP with SonicWall Network Security Appliances
    • OpenCA OCSP Responder
    • Loading Certificates to Use with OCSP
    • Using OCSP with VPN Policies
• DHCP over VPN
  • DHCP Relay Mode
  • Configuring the Central Gateway for DHCP Over VPN
  • Configuring DHCP over VPN Remote Gateway
  • Current DHCP over VPN Leases
• L2TP Servers and VPN Client Access
  • Configuring the L2TP Server
  • Viewing Currently Active L2TP Sessions
  • Configuring Microsoft Windows L2TP VPN Client Access
  • Configuring Google Android L2TP VPN Client Access
• AWS VPN
  • Overview
  • Creating a New VPN Connection
  • Reviewing the VPN Connection
    • Configuration on the Firewall
    • Configuration on Amazon Web Services
  • Route Propagation
  • AWS Regions
  • Deleting VPN Connections
• SonicWall Support
  • About This Document

Configuring the L2TP Server

The NETWORK | IPSec VPN > L2TP Server page provides the settings for configuring the SonicWall network security appliance as a L2TP Server.

To configure the L2TP Server

1. Navigate to the NETWORK | IPSec VPN > L2TP Server page.
2. Select Enable L2TP Server. Configure becomes available.

3. Click Configure to display the L2TP Server Configuration dialog.

   

4. On the L2TP Server screen, enter a value, in seconds, in the Keep alive time (secs) field. This specifies how often special packets are sent to keep the connection open. The default is 60 seconds.

5. Enter the IP address of your first DNS server in the DNS Server 1 field. If you have a second DNS server, type the IP address in the DNS Server 2 field.

6. Enter the IP address of your first WINS server in the WINS Server 1 field. If you have a second WINS server, type the IP address in the WINS Server 2 field.

7. Click L2TP Users.

   

8. Select one of the following radio buttons for IP address settings:

   IP address provided by RADIUS/LDAP Server	By default, this option is not selected. Choose it if a RADIUS/LDAP server provides IP addressing information to the L2TP clients. The Start IP and End IP fields are no longer active. To use this option RADIUS or LDAP authentication must be selected on the DEVICE | Users > Settings page. If this option is selected, an informational message to this effect is displayed. click OK.
   Use the Local L2TP IP Pool	This is the default IP address setting. Choose it if the L2TP Server provides IP addresses. Enter the range of private IP addresses on the LAN in the Start IP and End IP fields.

9. If you have configured a specific user group defined for using L2TP, select it from the User Group for L2TP users menu or use Everyone.

10. Click PPP.

    

11. Select an authentication protocol and click +Add to add it. You can also remove authentication protocols or rearrange the order of authentication.

12. Click OK.