Network Security Management Administration Guide


The created VPN Topologies that can be used in NSM are displayed in the list.

To add VPN Topology

  1. Click Add to add new VPN Topology.
  2. There are 4 steps to add the topology. Click Next after each screen to add the topology.

The following section provides detailed information of each wizard -

  1. Basic Information
  2. Setup Security Association
  3. Setup Gateway
  4. Summary

To edit existing VPN Topology

  1. Navigate to Home | VPN > IPsec VPN Topology and select the item from the list.
  2. In the Action column, select Edit.
  3. Navigate through the screens and make the changes needed.
  4. Click Done.
  5. Verify that the changes appear in the table.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.