Network Security Management Administration Guide

Technical Documentation > Network Security Management Administration Guide > Configuration Management > Approval Group Management > Adding a New Approval Group

Adding a New Approval Group

To add a new approval group

Navigate to Home | Config Management > Approval Groups and select the Approval Groups tab.
Click the +Add icon.
Type the Name of the approval group.
Type the Description in the field provided. Make it unique so you can easily search on it if needed. A maximum of 256 characters are allowed.
Click Next.
In the Users column, select the users that you want to act as approvers for this group, and click the right arrow to move them to the Selected Approvers column.

If the user you want is not listed, you need to go to MySonicWall to set them up.
Click Next.
In the Users column, select the users that you want to receive notice when approval is required, and click the right arrow to move them to the Selected Notificants column.
If you want to send notice to people not listed as users, enter their email in the Adhoc Email field and click Add to Notificant List.
Click Done.
Verify that the group appears in the table.

< Previous Section Next Section >

Was This Article Helpful?

Help us to improve our support portal

Yes! Not Really

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

Stay In Touch