Network Security Management Administration Guide

Editing Templates

If a template—applied to device group(s) or device(s)—is edited, the configuration changes are not automatically committed to the devices. You need to commit and deploy the changes so that the changes are pushed to the devices. To perform commit and deploy, see Committing and Deploying the Updates

The updates made to a zero touch template are automatically deployed to the applied zero-touch devices.

To define or edit a template

  1. If not already in Template View, either click the template name or select Edit Template in the Action field.
  2. Navigate to other options in Template View: Device, Network, Object, or Policy.
  3. While deleting object from template, NSM performs depedency check to ensure object is not used in any policy.
  4. Using the interface commands under each of these options, define the various parameters of your template. For information on performing configuration in these fields, see SonicOS documentation at https://www.sonicwall.com/support/technical-documentation/.
  5. After you update the template, click View Templates Details to see the updates done to the default.

    All the updates done to the template configuration are captured here.

  6. Click Close to return to Template inventory.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden