Network Security Management Administration Guide

Point to Point Topology

Basic Information

  • Topology Name : Enter a name to identify the Topology.
  • Description : This field is a mandatory field to move to the next screen. You can enter a short description to identify the topology.
  • Topology Type -
    • Point to Point - This connects two nodes directly together with a common link..
  • IP Version : The version of IP that can be used.
    • IPV4 - 32-Bit IP address which is numeric.
    • IPV6 - 128-Bit IP address which is alpha-numeric.
  • Policy Type : Type of the policy
    • Site to Site - Choose this option if there is a connection between two or more networks
    • Tunnel Interface - Choose this option to create connection between peers and Virtual Tunnel Interfaces.

Setup Security Association

Choose a security association from the drop down list.
The list is displayed only if there are any existing security associations available. To know how to add security association, refer Adding Security Association.

Once the security association is selected from the list, two tabs appear which displays the information while creating the security association. For more information on how to add Security Association, refer Security Associations.

Setup Gateway

This screen allows you to add the topology type you selected in the previous screen.

Add Device 1

  1. From the Choose devices drop down, select devices that are part of a group. You can also search for the devices or groups in the list by typing the name in the input field.
    You can only select the devices that are part of a group.

  2. After selecting a device, you are required to choose the following options
    1. Choose Devices - Choose devices from the drop down list.
    2. WAN Interface - From the drop down list, select WAN Interface.
    3. Primary Gateway - Enter the primary gateway in the text box.
    4. Secondary Gateway - Enter the secondary gateway in the text box.
    5. Local IKE ID Criteria - Click the radio button to choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address.
    6. IKE ID - This field is auto-populated and cannot be edited.
    7. Source Address - From the drop down list, select the address. Click the Edit icon to add or edit Address Object and Group.

Add Device 2

  1. From the Choose devices drop down, select groups or devices by checking the box. You can also search for the devices or groups in the list by typing the name in the input field. Click Apply to select the device. The devices that are selected are displayed in a list.
    Device 1 and Device 2 should not have overlapping IP Addresses in any of the fields.

  2. To use the common configuration, click Common Configuration icon.
    After selecting the common configuration, you are required to choose the following options :
    1. Reference Device - From the drop down list, select the reference device.
    2. WAN Interface - Choose WAN interface from the list. The options get enabled only after selecting Reference device.
    3. Local IKE ID Criteria - Click the radio button to choose from Firewall ID, IPV4 Address, Domain Name, Key Identifier, and Email Address.
    4. IKE ID - This field is auto-populated and cannot be edited.
    5. Source Address - From the drop down list, choose a source address or click Edit icon to add New address object or group.
  3. To edit the configuration of the device, go to the Action column and select Edit icon.

Summary

This is the last step to create a VPN Topology. It displays the summary of the selected devices with the Device Name, VPN Interface, Status and Errors. In case if there are any errors, you are required to view and resolve them before adding a topology.

Click Done to finish and exit the wizard or Previous to go back to the previous screen.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.