Network Security Management Administration Guide

Editing an Approval Group

To edit an approval group

  1. Navigate to Home | Config Management > Approval Groups and select the Approval Groups tab.
  2. Select the group name of the group you want to edit.
  3. In the Action column, select Edit.
  4. Navigate through the screens and make the changes needed.
  5. Click Done.
  6. Verify that the changes appear in the table.

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.