Network Security Manager Saas Administration Guide

Technical Documentation>  Templates>  Template View>  Storage
Table of Contents

Storage

The DEVICE | Settings > Storage page on the Template View allows you to enable the storage options for the System and Threat Logs as well as the Packet Capture Logs.

To enable storage settings

  1. Navigate to Template View | Device > Settings > Storage tab.

  2. Configure the following options under System and Threat Logs:

    • Enable the Enable Logging to Storage for storing system logs, threat logs, audit logs, and AppFlow report data to the External Storage.
    • Select Primary or Secondary from the Logs Storage Device Type drop-down menu.

  3. Enable the Enable Logging to Storage option under Packets Capture Logs.

  4. Click OK.
  5. Click Apply Template to apply the storage settings to the template.

Enabling Enable Logging to Storage requires a reboot for the changes to take effect.