Version 10.2.334

November 2024

About NetExtender

NetExtender is a transparent software application for Windows users that enables remote users to securely connect to a network accessed through a SonicWall appliance. With NetExtender, remote users can securely run any application on the remote network. Users can upload and download files, mount network drives, and access resources as if they were on the local network. The NetExtender connection uses a Point-to-Point Protocol (PPP) connection.

This release supports all the features and contains all the resolved issues found in previous NetExtender releases. For more information, see the previous release notes, available on MySonicWall at: https://mysonicwall.com.

Compatibility and Installation Notes

• Most popular browsers are supported, but Google Chrome is preferred for the real-time graphics display on the Dashboard.
• A MySonicWall account is required.

• NetExtender version 10.2.331 and below is incompatible with Capture client 3.7.5 and above.
• SonicWall recommends to use the latest NetExtender version 10.2.334 (msi) installer only with the version of Capture Client 3.7.5 and above to resolve the incompatibility.

Supported Platforms

NetExtender Client Versions

The following is the NetExtender client version in this release.

Version	Description
10.2.334	NetExtender for Windows 10/11

Supported Client Platforms

NetExtender 10.2.334 is supported on computers running the following Windows version:

• Windows 10/11

Supported SonicWall Appliances

SonicWall appliances receive NetExtender connections from remote clients. The following appliances are supported:

• SonicWall firewalls running SonicOS or SonicOS 7.0.0 and higher, including the following platforms:
  • TZ 270, TZ 270W, TZ 370, TZ 370W, TZ 470, TZ 470W running SonicOS 7
  • TZ 570, TZ 570W, TZ Z570P, TZ 670 running SonicOS 7
  • NSa 2700, NSa 3700, NSa 4700, NSa 5700 running SonicOS 7
  • NSv 270, NSv 470, and NSv 870 running SonicOS or SonicOS 7
  • NSsp 15700 running SonicOS 7
• SonicWall firewalls running SonicOS 6.5.4.7 and higher, including the NSa, TZ, SOHO, and SuperMassive series platforms:
  • TZ 300, TZ 300W, TZ 300P, TZ 350, TZ 350W, TZ 400, TZ 400W, TZ 500, TZ 500W, TZ 600, TZ 600P
  • NSa 2600, 3600, 4600, 5600, 6600
  • NSa 2650, 3650, 4650, 5650, 6650, 9250, 9450, 9650
  • SOHO W, SOHO 250, SOHO 250W
  • SuperMassive 9200, 9400, 9600
• SonicWall virtual firewalls running all releases of SonicOS 6.5.4.4v, including the following NSv series platforms:
  • NSv 10, 25, 50, 100, 200, 300, 400, 800, 1600
• Secure Mobile Access (SMA) 100 Series appliances running SMA 10.2.1 or higher:
  • SMA 200, SMA 210, SMA 400, SMA 410
  • SMA 500v for ESXi (on ESXi 5.0 and higher)
  • SMA 500v for Hyper-V (on Hyper-V 2016 and 2019)
  • SMA 500v for AWS
  • SMA 500v for Azure
  • SMA 500v for KVM

Supported Firewall Firmware Version

• GEN 6.5 – 6.5.4.12-101n
• GEN 7 – 7.0.1-5111

SonicWall recommends to use the latest GEN 7.0.1-5111 firmware for optimal performance.

Supported Firmware SMA Versions

• SMA 100 10.2.1.8

SonicWall recommends to use the latest NetExtender version with the latest version of SMA 100 Series firmware for optimal performance.

Supported Firmware Capture Client Versions

• Windows Client Capture Client 3.7.5 and above.

SonicWall recommends to use the latest NetExtender version 10.2.334 (msi) installer only with the version of Capture Client 3.7.5 and above to resolve the incompatibility.

What's New

Standalone NetExtender Windows release.

Windows Client Capture Client supported version 3.7.5 and above.

The latest NetExtender Windows version 10.2.334 (msi) installer only with the Capture Client version 3.7.5 and above fixes the incompatibility issue.

Resolved Issues

Issue ID	Issue Description
SMA-4165	Resolved the NetExtender installation issues on the Capture client version 3.7.5 and above installed devices.