09/21/2023 629 People found this article helpful 469,994 Views
This article describes how to create a DHCP dynamic lease scope without binding it to any interface of the SonicWall UTM appliance.
Such a lease scope can have an IP address range not configured on any interface of the SonicWall. This would be helpful in environments where the administrator requires GVC users to have IP addresses in a SEPARATE subnet.
This release includes significant user interface changes and many new features that are different from the SonicOS 6.5 and earlier firmware. The below resolution is for customers using SonicOS 7.X firmware.
Under WAN GroupVPN | Client | Client CONNECTIONS | Virtual Adapter setting set DHCP Lease.
To create a separate DHCP range where the dhcp server will be the Sonciwall firewall use DHCP Configuration in SonicWall.
NOTE: Do not enable the check box Interface Pre-Populate.
By using the Relay IP Address option with an interface independent DHCP Lease Scope, GVC clients can be served IP Addresses from the dedicated pool above. To use this DHCP scope for GVC clients, perform the following:
DHCP over VPN Settings:
Following the above configuration, GVC clients will be leased an IP address from the range 192.168.10.x. If VPN Access List is configured, GVC users will be able to access the resource/s added in it.
This release includes significant user interface changes and many new features that are different from the SonicOS 6.2 and earlier firmware. The below resolution is for customers using SonicOS 6.5 firmware.
Under WAN GroupVPN | Client | Client CONNECTIONS | Virtual Adapter settingenable DHCP Lease.
To create a separate DHCP range where the dhcp server will be the Sonciwall firewall use DHCP Configuration in SonicWall.
NOTE: Do not enable the check box Interface Pre-Populate.
By using the Relay IP Address option with an interface independent DHCP Lease Scope, GVC clients can be served IP Addresses from the dedicated pool above. To use this DHCP scope for GVC clients, perform the following:
DHCP over VPN Settings:
Following the above configuration, GVC clients will be leased an IP address from the range 192.168.10.x. If VPN Access List is configured, GVC users will be able to access the resource/s added in it.
There are two ways to contact technical support:1. Online: Visit mysonicwall.com. Once logged in select Resources & Support | Support | Create Case.
2. By phone: please use our toll-free number at 1-888-793-2830. Please have your SonicWall serial number available to create a new support case.
If you do not have a mysonicwall.com account create one for free!