Wireless: SonicPoint NDR and N the Dashboard information is not visible Under Accesspoints - Dashboard

For SonicPoint NDR and N the Dashboard information is not visible Under Accesspoints -> Dashboard.

Question: Is this is by design or this will be supported for N and NDR in future?

                  However for N2, AC and WAVE we are able to view the clients connected on the dashboard.

Meanwhile when AC and NDR both are connected, the Sonicpoint NDR does not show the Dashboard information or clients connected as shown below:

Also if we click on the SonicPoint NDR it shows the following information as “Device not support monitor!”.

While, on the other hand Sonicpoint ACe Shows the dashboard information on clicking the SonicPoint name.

From 6.5 and above the dashboard information does not show for N and NDR units.

This is how NDR and N is designed and not compatible with dashboard monitor.

It is by design. Only sonicpointAci/Ace/N2 and Sonicwave support real time monitor. There is hint on GUI about supported platforms.