Update Uboot, Safemode, and Firmware on SonicWave 200 and 400 series

1) Prepare PoE & cables as illustrated (AP is off)

2) Press and hold the reset button and power up the access point. Release button after 10 seconds. LED lights: Power solid blue, LAN  5G  2.4G blinking green in order
3) Launch browser to connect to access point UI via http://192.168.1.20 (not https)
4) It will launch the access point safemode page
5) Download the firmware from below links
a. SonicWave 200 series firmware pack
b. SonicWave 400 series firmware pack

6) Follow the steps in the below A>B>C order
A) Upload Uboot provided
• Step_A_SW200_sp_uboot_xxx.bin.sig
Wait for successful upload completion

B) Upload Safemode
• Step_B_SW200_sp_sm_xxx.bin.sig
Wait for successful upload completion

C) Upload Firmware
• Step_C_SW200_spw_eng_xxx.bin.sig
Wait for successful upload completion

7) Upon firmware update completion login to access point UI https://192.168.1.20 (admin/password) and confirm access point upgrade is successful

8) All Done