Access Points and Switches Management Getting Started Guide
Table of Contents
Supported Devices
SonicWall Access Points and Switches Management 4.8.0 automatically imports supported devices registered on MySonicWall that are licensed for Access Points and Switches Management. Devices can be registered through either MySonicWall.com registration page or from a mobile device through the SonicExpress app.
For more information about registering access points through the app, refer to the SonicExpress User Guide. This and other documentation are available under the product “Secure Wireless Products” on the SonicWall support website: Technical Documentation portal.
SonicWave Access Points
Access Points and Switches Management is supported for the following SonicWall SonicWave wireless access points:
| SonicWave 200 Series | SonicWave 400 Series | SonicWave 600 Series |
|---|---|---|
|
224w 231c 231o |
|
|
- SonicWave400 series require SonicOS version 9.1.3.5_13 and above.
SonicWave200 series require SonicOS version 9.2.3.5_13 and above.
SonicWave 600 series devices require SonicOS version 9.6.4.0_13 and above.
SonicWall Switches
Access Points and Switches Management 4.8.0 is supported for the following SonicWall Switches:
| Switch SWS12 Series | Switch SWS14 Series |
|---|---|
|
|
For the Switch to be managed by Access Points and Switches Management, the switch firmware must be version 1.0.0.3-12s or higher. It is highly recommended that you upgrade the Switch firmware to version 1.3.3 once it is being managed by Access Points and Switches Management.
After deploying your SonicWave devices from MySonicWall.com or from the SonicExpress app:
You can log into SonicWall Unified Management (platform.sonicwall.com) and Click on Access Points and Switches Management from the left navigation menu.
OR
Access the Capture Security Center from MySonicWall.com by choosing the Services tile on the left of the screen, then choosing Available Services. The Capture Security Center is listed there and you can click on the icon to open Capture Security Center. Choose the tile for Wireless Network Manager.
Alternatively, the user can access CSC directly by the URL cloud.sonicwall.com.
Once the Access Points and Switches Management dashboard is displayed, navigate to Network > Devices from the left navigation menu.
You may now verify that the access points in your environment are active and also the current version of firmware the AP is using.
