• SonicOSX 7 Profile Objects
• Endpoint Security
• Bandwidth
  • Understanding Bandwidth Profiles
  • Bandwidth Profiles
    • Configuring Bandwidth Object Settings
      • Elemental Bandwidth Object Settings
    • Configuring BWM on an Interface
    • Configuring BWM in a Security Rule Action
    • Editing Bandwidth Profiles
    • Deleting Bandwidth Profiles
• Block Page
  • Customizing Block Page Settings
  • Cloning Block Pages
  • Deleting Block Pages
• Log and Alerts
  • Adding Log and Alerts Profiles
    • About Event Profiles
  • Editing Log and Alert Profiles
  • Deleting Log and Alert Profiles
• Intrusion Prevention
  • Configuring Intrusion Prevention Profiles
  • Deleting Intrusion Prevention Profiles
• QoS Marking
  • Classification
  • Marking
  • Conditioning
    • Site to Site VPN over QoS Capable Networks
    • Site to Site VPN over Public Networks
  • 802.1p and DSCP QoS
    • Enabling 802.1p
    • DSCP Marking
      • DSCP Marking and Mixed VPN Traffic
      • Configure for 802.1p CoS 4 – Controlled Load
      • QoS Mapping
      • Managing QoS Marking
  • Configuring QoS Marking
• DHCP Option
  • Configuring DHCP Option Objects
    • RFC-Defined DHCPV4 Option Numbers
    • RFC-Defined DHCPV6 Option Numbers
  • Editing DHCP Option Objects
  • Deleting DHCP Option Objects
• AWS
  • AWS Objects
    • About Address Object Mapping with AWS
    • Viewing Instance Properties in SonicOSX
    • Creating a New Address Object Mapping
    • Enable Mapping
    • Configuring Synchronization
    • Configuring Regions to Monitor
    • Verifying AWS Address Objects and Groups
• SonicWall Support
  • About This Document

Log and Alerts

Use Log and Alerts to filter packets with defined conditions that can be used with corresponding Action applications.

To configure Log and Alerts

1. Navigate to OBJECT | Profile Objects > Log and Alerts.

   The Log and Alerts page appears.

   

• Adding Log and Alerts Profiles
• Editing Log and Alert Profiles
• Deleting Log and Alert Profiles