SonicOSX 7 Getting Started Guide for NSsp 15700

Show Commands at ChassisOS Prompt

Enter show ? to get a list:

Show OS Commands

  • show console-logs: Shows logs of individual logical blades, allows stepping through logs of all four logical blades. These are SonicOSX console logs.
  • show core-dump-files: Show all of the core dump files that have been generated so far.
  • show env-sensors: Lists BMC parameters tracking temperature, fan speed, and so on.
  • show mt-status: Shows allocation of CPU cores on specified CPU (1 to 4) among the two Logical Blades. This command only works on the master blade (Physical Blade 1).
  • show system-status: This command is particularly useful in showing processes in progress on the two Physical Blades:

    show system status Command

A useful installation routine for administrators would be to first check system hardware indications with show env-sensors:

show env-sensors

Then check SonicOSX with show sonicos-status:

show soniocs- status

Was This Article Helpful?

Help us to improve our support portal

Techdocs Article Helpful form

  • Hidden
  • Hidden

Techdocs Article NOT Helpful form

  • Still can't find what you're looking for? Try our knowledge base or ask our community for more help.
  • Hidden
  • Hidden